WLAN Access Point (TP-Link TL-WN822N) mit FreeBSD

Konfiguration von FreeBSD als WLAN Access Point

Wichtig: Ein von FreeBSD unterstützter WLAN Adapter (auch als Host AP). In diesem Fall ein TP-Link TL-WN822N V4, dieser hat einen Realtek RTL8192EU WLAN-Controller.

root@fbsd-ap:~ # usbconfig
ugen2.2: <Realtek 802.11n NIC> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

Der HOSTAP Modus wird unterstützt:

root@fbsd-ap:~ # ifconfig wlan0 list caps
drivercaps=591c541<STA,FF,IBSS,HOSTAP,SHSLOT,SHPREAMBLE,MONITOR,WPA1,WPA2,WME>
cryptocaps=b<WEP,TKIP,AES_CCM>
htcaps=7002c<SHORTGI20>

Auszug aus /etc/rc.conf fuer WLAN:

# WLAN
if_rtwn_usb_load="YES"
wlans_rtwn0="wlan0"
create_args_wlan0="wlanmode hostap"
hostapd_enable="YES"
ifconfig_wlan0="ssid freebsd-ap country DE mode 11ng"
# Bridge
cloned_interfaces="br0"
ifconfig_br0="addm re0 addm wlan0 up"

Installation des Pakets hostapd mit "pkg install hostapd"

Auszug aus der Datei /etc/hostapd.conf

interface=wlan0

driver=bsd
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2

ctrl_interface=/var/run/hostapd
ctrl_interface_group=0

ssid=fbsd-ap

country_code=DE
ieee80211d=1

hw_mode=g
channel=1

beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=-1
fragm_threshold=-1
macaddr_acl=0
ignore_broadcast_ssid=0

wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0

eapol_key_index_workaround=0
eap_server=0